Pen Multimeter Protective Cases (2 versions)

If you are an owner of one of the more compact pen multimeters, (such as the Aneng A3008, A3009, ET8906 and ET8908), and are looking for a protective case to store it in, then one of these cases may be what you are looking for.Both cases have room for the multimeter in the right hand compartment and accessories (such as test lead) in the left side compartment. The multimeter can be placed with the probe towards the top or the bottom of the case with the display facing upwards.The compartments inside each case are the same size, but the opening angle and outer dimensions vary.Rugged StyleThis case is more robust, is slightly wider due to the latches and requires six 3mmx30mm screws for the hinges and latches. If countersunk head screws are to be used, the outer webs can be countersunk using a 6mm drill bit so the head sits flat onto the web. Alternately, the screws would need to be 33mm long. Basic StyleThis case does not require any additional hardware, is slightly narrower overall and