Thingiverse
Pepper Spray Keychain Quick-release
by o-murphy
1
Downloads
3
Likes
0
Makes
## Pepper Spray Keychain holder with quick-release option
* Pull sharply and the hinge will unfasten
* Compatible with ⌀25mm diameter and 65mm height sprays
### Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. Setup automatic tree-style supports for printing. Use the 35% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
**[Contact me if you have some questions](https://github.com/o-murphy)**
* Pull sharply and the hinge will unfasten
* Compatible with ⌀25mm diameter and 65mm height sprays
### Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. Setup automatic tree-style supports for printing. Use the 35% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
**[Contact me if you have some questions](https://github.com/o-murphy)**
o-murphy also publishes on
7 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
