Perfect-Fit Inner Pot - Parametric

The perfect inner pot generator for any pot, any size! Simply measure the bottom diameter, top diameter and height of your desired pot and print away! This designs features stand-off feet and holes for optimal excess water drainage. It is designed in a way to make it print easily (no supports needed) and be assembled in seconds. Follow these steps for best results: Measure: Measure the inner bottom diameter, inner top diameter and height. Be conservative with your measurements, don't overshoot! Input your parameters into the parametric model maker: - The minimum bottom diameter is 30mm. - The top diameter must be at least as large as the bottom one. - The minimum height is 20mm. - The leg height must be at least 4mm. - The minimum (and recommended) amount of walls are 2. If you try to go below the minimum values the file will the default to the minimums described above. Print! Depending on the size of your pot, you may need to separate the model onto multiple plates. I recommend pr