Peristaltic pump

Edit 02 Sep 2019: code for Arduino driver https://github.com/KarimLakra/OSP2_Open-Source-Peristaltic-Pump_3D-printed-peristaltic-pump-Arduino-program-controller I needed for many things a water pump(liquid pump), I found the peristaltic pump the best for a precision dosing, can be used also for continuous pumping, the liquid is separated by the tubing from other parts, it can be used for food and many applications safely, offers easy maintenance... After I watched many designs, as always, I like to design my own to see how far I can make it, so feel free to suggest any useful tips! The capacity of this pump as you can see in the video is about 160ml per minute, you can push this value a little bit it upper, but I didn't want to destroy the tubing. The pump is easy to assemble, but I attached pictures step by step. I started last year the project from a user interface using arduinoMega2560 with a TFT screen, the code get complicated when I added many options to control the pump(maybe I continue writing that code when I have time), but I will soon add the schematics to test this pump, with just some basic electronics( no arduino). Parts needed: 4 * M3 nuts 3 * M1,85x10 screw 3 * M3x3 screw 4 * M3x8 screw 4 * M3x11 screw 3 * Bearings 5x13x4mm 695ZZ(I attached also a printable bearing if you want to try it) Tubing PharMed BPT (information in the picture) Questions also are welcome. The files for 3D printing also here: https://www.thingiverse.com/thing:2819311 more information and updates are posted on my web pages: http://karim.lakras.eu/ Note: I made holes for the M3 nut that are not used all of them, but they can be useful if you need to lock the parts very well. I made also deep holes for the M3 screws, so if you want to use a longer screws, they have place already. There is attached file for the rollers if you decide to print them, make sure you make their edges smooth, so you will not cut the tubing. Also the triangles that holds the bearings, are marked by a line