Peristaltic Pump

This peristaltic pump is designed for watering plants in a hydroponic system.
The basic elements are a stepper motor (Nema17), 6 ball bearings and a silicone tube (outer diameter 10mm).

Needed parts:
- stepper Nema 17 motor (incl. driver etc.)
- 4x flat head screw M3 x 8 (motor to print)
- silicone tube, outer diameter 10mm
- hose connector for non-elastic hose and cable ties: also enlarges the outer diameter so that the pump cannot pull in the elastic hose
- 4x cylinder head screw M3 x 10 (printing parts Top to Bottom)
- 4x melting thread insert M3 (insert into printing part Bottom)


Spinner:
- 6x ball bearings (diameters: outer 16mm, inner 8 and 5mm height) the "Peristaltic_Pump_BearingAdapter_8_5_5" brings the inner diameter down for the M5 screws
- 3x flat head screw M5 x 25 incl. lock nuts M5