Thingiverse

PET-Kanna

von hallonhatt

184 Downloads

165 Likes

2 Makes

I modified this soda bottle watering can adapter to make the stream a bit softer on the soil in my smaller pots. For the small streams to not just join again after the nozzle, it is essential that the holes are small. If your printer/filament setup fuses the holes together, drill them out with a 1-1,5mm drill bit. This is not for pouring large amounts of water since that will take forever!

In the spirit of the original thing, I call it PET-Kanna in reference to the Swedish word vattenkanna :)

bottle Bottle cap plant watering screw cap soda soda bottle water watering can bottle Bottle cap plant watering screw cap soda soda bottle water watering can bottle Bottle cap plant watering screw cap soda soda bottle water watering can

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat