PET / KAPTON roll holder

PLEASE note:
This is a non-commercial license--make for yourself or as gifts to give-away to friends and family.

*** added slider_V2 stl file with one wall open to access nut while the bracket is mounted


Just another PET / Kapton roll holder, nothing fancy.

Hardware:
1/4-20 square nut x 2pcs
1/4-20 hex bolt x 3/4 inch x 2pcs
No 8 x 1.5 inch wood screw

OR

M6 hex bolt x 20mm x 2pcs
M6 Square nut x 2pcs

stl's with M_ are changed to fit metric hardware

STl's named "extra_thick _side" are thicker side by .1" or 2.5mm
where standard side is .15" or just under 4mm thick


Once side is posted so print 2 of what you need for this build

Depending on media used some fitting / sanding might be needed


cheers