Pet vacuum brush

Ok, first things first. If you're not interested in reading on please note the brushes are designed to be printed in flex filament. Each strand is 1.2mm in diameter so PLA/ABS/PET may be too stiff and could hurt your pet!! also flex filament is slightly rubbery which helps grip and remove loose hairs. Most modern Vacuums are very powerful, I'd highly recommend using the vacuum on a low setting if you have the option or at the very least opening the bleed air valve to reduce suction (usually a little collar or slider near the handle) most (if not all) vacuums have these. This is NOT designed to physically suck the hair off your pet!

It fits a 34-35mm wand (as found on shark vacuums), but can easily be molded using a hair dryer to fit slightly larger or small diameters. alternatively a remix by sticking on a different size tube should be fairly easy.

For those of you who have decided to read on, here's the basic idea behind it, how to print and put it together.

The attachment is