Phanteks Enthoo Bracket for Cablemod Cable v4.0

This is a Bracket to hold the Cablemod PCIe 4.0 Riser Cable on the Phanteks Enthoo Elite Vertical Bracket. The Phanteks bracket has 3 slots and by default the GPU has to be placed on the 3rd slot on the back. The problem is that by having and Active/Thicker Backplate on the GPU it is too close to the Motherboard and leaves no clearance. I desined this bracket to be installed in the Phanteks bracket so that the GPU can be securely installed starting from the second slot. Regarding the screws, I did not use the predrilled #6-32 screw holes on the Phanteks Bracket.Instead, you will need: 2 x 12mm M3 for the front side (also to pass through the Phanteks Logo as seen in the Pictures)2 x 25mm M3 for the back side. Please note that the designed bracket has been tested only to fit the Cablemod PCIe 4.0 Cable along with the Phanteks Enthoo Elite Vertical GPU Mount. Cannot guarantee fitment with other brand of Riser cables and Vertical Brackets.