Thingiverse
Philips OneBlade Stand
by Ray_01403
1.3k
Downloads
1.1k
Likes
2
Makes
A stand for the Philips OneBlade and its standard accessories.
-OneBlade Holder
- 2 Blade slots
- 4 Guard Slots (1,2,3,5mm)
- 2 Slots for Face and body guards
Printed in PLA at 0.3 using Ender 5 Plus with 30% Cura Lightning Infill
- Lower infill % and infill type can be used instead.
https://cad.onshape.com/documents/8a2cbff8a36f422a15aed11d/w/79fd7f703b8d24fda4694e9d/e/abcc270d6f20bac6669638ba?renderMode=0&uiState=671f522a73c5d12ccecf3c80
-OneBlade Holder
- 2 Blade slots
- 4 Guard Slots (1,2,3,5mm)
- 2 Slots for Face and body guards
Printed in PLA at 0.3 using Ender 5 Plus with 30% Cura Lightning Infill
- Lower infill % and infill type can be used instead.
https://cad.onshape.com/documents/8a2cbff8a36f422a15aed11d/w/79fd7f703b8d24fda4694e9d/e/abcc270d6f20bac6669638ba?renderMode=0&uiState=671f522a73c5d12ccecf3c80
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
