Phoenix 10x15cm - hueforge

Fire eagle like bird known as phoenix (or misspelled pheonix)Made using hueforge To use 5 filaments on 4 color AMS load first 4 filaments and then swap the first filament with the last filament after it is done printing during the print and set the filament of the last color to first one. In this case you would set Black on model as Black in AMS, Red on model as Red in AMS, Orange on model as Orange on AMS, Gold on model as Gold on AMS and White on model as Black on AMS. You can add pause after black color and to the swap, or you can swap the black to white during the printing of other colors. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Creality Red Transmission Distance: 2.5 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA Creality Gold Transmission Distance: 2.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to M