Phoenix Hueforge

Phoenix Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.6mm Filaments Used:PLA+ Elegoo - Black Transmission Distance: 0.1PLA BambuLab Basic - Maroon Red Transmission Distance: 1.2PLA PolyLite - Red Transmission Distance: 4.2PLA PolyLite - Orange Transmission Distance: 5.8PLA PolyLite - Lemon Yellow Transmission Distance: 5.6PLA Paramount 3D - White Transmission Distance: 8.5This print uses 6 unique filaments Swap Instructions:Start with TD1 - BlackAt layer #11 (0.56mm) swap to Maroon RedAt layer #14 (0.68mm) swap to RedAt layer #23 (1.04mm) swap to OrangeAt layer #36 (1.56mm) swap to Lemon YellowAt layer #48 (2.04mm) swap to White for the rest.