Slicer Discord
Phone Dock with Charging – 3D-printbaar model van MakerWorld MakerWorld
Organizers

Phone Dock with Charging

6 Downloads
3 Likes
1 Makes
Model downloaden
A clean and practical phone dock with chargin, designed for everyday desk use. The dock supports charging up to two phones at the same time for a tidy setup. 3 Versions included; Plate 1 - English text “Phone Dock with Charging” Plate 2 - Swedish text “Telefondagis med Laddning” Plate 3 - Blank (add your own text or design) What's included Phone dock (the main body) Bottom cover (the cover plate underneath for the electronics) Installation Insert the USB-c female connectors into the 3 slots. It should be press fit, use some glue if its too loose. Use solder with heatshrink or wago connectors to connect all the black- (negative) and all the red- (positive). Screw on the cover to protect the electronics. BOM 3 x USB-C female connectors (https://www.amazon.se/dp/B0C6D2YS1V?ref=ppx_yo2ov_dt_b_fed_asin_title) 1 x M2,5 / M3 self tapping screws with a maximum length of 10mm. (optional) 2 x short(15cm) usb-c to usb-c charging cables If you have ideas for improvements or variation, feel free to
Categorie
Organizers
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
uitgebreide nabewerking
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 2/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Nabewerking
Lijmen, Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie