Phone Gimbal v2

This design incorporates the use of 625zz bearings. I had these already and I wanted to incorporate these into the design for smooth movement. These bearings are typically available from Amazon or similar retail outlets. I had these already from a load of 3d printer POM wheels I had from my old Ender 3/V3 days. Requirements:This design is printed in PLA but PETG would also be a good choice2 No. M5 Cap head Bolts and nuts 30mm long approx. 1 No. M5 cap Head Bolt and nut 50mm long approx.Old coins or weights for the ballast at the end of the main shaft.Point to note:For optimum balance - depending on what model of phone you are using, your handset will need to be moved left or right within the phone holder to achieve the desired balance. The 625zz bearing will need to be pressed into place - I used hand clamps I had in my workshop to press these into place. Boost MeIf you find this upload useful, then please consider boosting my efforts. Thank you so much!