Photon Air Filter

The air filtration on the Anycubic Photon is a bit lacking - there are a number of DIY filter systems on Thingiverse, but I really wanted something a bit more compact (at least as compact as possible) but still using an easily sourced filter system.

This 'Thing' takes advantage of a couple of other designs on Thingiverse to build a robust filter system.

I've design this to be push fit, so besides the M3 screws to mount the Fan_mount.stl to the back of the printer, it will (tightly) push together and hold - though I did put in some 3mm holes if you need to put a couple of small 5mm M3 screws in.

To build this filter system you will need:

1 x RC64R Respirator Filter - this is the one I used down here in Australia - https://www.bunnings.com.au/protector-p2-particulate-respirator-filter_p5820170
1 x 60mm x 25mm 12V Fan - I used the Noctua NF-A6x25 FLX - https://noctua.at/en/nf-a6x25-flx

Misc 3mm screws (I suggest 20mm to fit the mount as the nuts are fiddly, but 8/10mm will