Phytolamp

I developed this LED lamp F6040 project to illuminate a plant that makes me happy at my work place. As it turns out, the lamp gets very hot. Even with a small 12V fan installed, temperatures can reach over 70 degrees. This causes the plastic of the case to become flexible. Therefore, I supplemented the lamp with a fiberglass platform, which I secured with six self-tapping screws from the computer unit, drilling additional 2.5 mm holes.
We also had to solder the driver for the fan according to the attached diagram.
For assembly you need M4 bolts 25 mm and 16 mm long and nuts for them.
Perhaps not my most successful project. But I like the bracket itself; it turned out to be very functional and practical. I propose to consider it as an idea.
8.02.2024
A part has been added for mounting on a wider base.