Pi + 2.5" HDD Rack

Case and caddies for a Raspberry Pi and 1-6 2.5" Hard drives.

2 slot version can be printed in a single go, by placing the hdd caddy around the case.

Includes a 40mm fan hole in the back.

Spikes on the side are for guiding a rubber band, to provide more retention force as the compliant clips don't give much themselves. Due to the print orientation of the case, the clips will never be able to provide much force without risking layer seperation.

# Bill of Materials
- 1x Raspberry Pi (tested w/ Raspi 4B)
- 1-6x 2.5" hard drive
- 4x M3x10 screws for each hard drive
- 4x M3x16 screws for the fan
- 4x M3 Nuts for the fan
- 4x M2.5x6 screws for the Raspberry Pi
- 1x 90 degree USB cable for the Raspberry Pi
- 1x 40mm Fan