Pi 5 Case

A Pi 5 case with a roll cage, option camera mount attached to external rails and the clamp can be used to mount other components like ultra-sound for instance. Will happily print at 0.2mm with a 4mm nozzle, but the quality of the smaller profiles will obviously benefit from 0.1mm printing at a slightly slower speed on the Bamboo X1. Machine screws (I used socket head, but any will do fine) required to hold rails together - 4 No. M3 x 35mm (drilling out one side of the rails for clearance will help). 2 No. M3 by 16mm screws and nuts for the camera clamp and 2 No. M4 x 18mm for the camera are also required. I have left mounting posts in the base with through holes if you want to mount a second board on pillars. The case is high enough to take the heat pipe cooler and the lid has holes for all ribbon cables. The Power LED can be seen on the end of the case and there is a tiny button for the hole adjacent to the LED to power the Pi5 on and off. Print profile attached in for 0.1 mm layers a