Thingiverse

Pi Camera Telescope Mount

von scottpreston

11 Downloads

1 Likes

0 Makes

I created a base that connects to my 75mm VESA mount with 1" standoffs. The base mounts the PI Camera 2.1 and fits over-top of my Celestron Plossl eyepiece. I can secure with a piece of painters tape. You will need 2mm screws to mount the camera to the base. I used 6-32 1" standoffs with 6-32 3/8" socket head cap screws to mount.

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat