Thingiverse
Pi-Hole-RackPi-Plugable USB - oled screen
por cIPA28
10
Descargas
5
Likes
0
Makes
Rack support for Raspberry Pi zero / zero W - Plugable USB 2.0 OTG and OLED screen 28x32 OLED 0,91 "SSD1306.
!!!!! attention this support involves the modification of the rack frame because the oled screen and the LAN socket protrude from the fixing guides as shown in the photo, you have to sand the rack frame a bit as shown in the photo, the red circles are the parts to be removed while the lines green are the rack rails !!!!!
install Pi-hole: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pi-hole
Install Pi-Hole screen oled: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pioled
!!!!! attention this support involves the modification of the rack frame because the oled screen and the LAN socket protrude from the fixing guides as shown in the photo, you have to sand the rack frame a bit as shown in the photo, the red circles are the parts to be removed while the lines green are the rack rails !!!!!
install Pi-hole: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pi-hole
Install Pi-Hole screen oled: https://learn.adafruit.com/pi-hole-ad-blocker-with-pi-zero-w/install-pioled
cIPA28 también publica en
48 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!