Pi4 and BTT PiTFT50 wall mount case

I wanted to have a nice wall-mounted case for raspberry pi 4 and BTT PiTFT50 screen that would include everything in one package. Print out the parts, assemble, and hang them on the wall!

When printing the only thing you have to flip is the front. I will fix it and upload a better file but for now, it needs to be flipped to print it face down.

Items needed:
X4 M3X10 screws
X4 M3 Heat inserts

Assembly:

Mount the pi4 to the back of the PiTFT50 screen with brass standoffs that came with the screen. Put the pi to the screen and screw in the stand offs

Take a soldering iron and put the heat inserts into the mount

Push-fit in a 40x40 pifan into the bottom of the base and plug the wires in the GPIO pins of the pi.

Use about a 6" micro Phillips screwdriver to mount the pi to the base.

Test fit the mounting plate into the mount to make sure that the plate will fit. Some post-processing might be needed.

Attach the plate onto your wall and slide the mount onto the wal