PI5 Case ICE Tower 52pi

# PI 5 Case

This is a case for the Raspberry PI 5 with the ICE Tower from 52pi. Added a alternative Top with honeycomb holes. This alternative design is easyer to print with SLA than with FDM, but both will work.

## Printing

_Print the fan grid twice_ ;)

### FDM (PLA)

There is no need for support for printing, four small supports for the screwholes are included in the base STL where it will be needed. Print the hood upside down and the fan grids with the flat outside noses down on the printbed. The overhang can be done by any printer I've seen yet without problems.

### SLA (ABS-LIKE)

Printing this design on a SLA-Printer should also work without a problem. For the fan grid's I highly recommend a ABS-like resin, or an other with some flexibility in it. The grids have to be compressed on mounting, a brittle resign could break at this process.

## Additional Materials

You don't need any extra Material. All you need is a Raspberry PI5 and the ICE-TOWER-COOLER from