Thingiverse
Piaggio Fly headlight LED support
von lari6
12
Downloads
4
Likes
0
Makes
UPGRADED WITH 2 HOLES FOR LOCK!
This is a piece required if you want to upgrade your Piaggio Fly Scooter headlight from bulb to LED.
I bought the LED from ebay (COB LED 35w Motorcycle) and I needed a support that will fit into the original headlight of my scooter to hold the new LED.
You will need to rewire your headlight from AC to DC; in order to do that you have to take out the input AC wire (the thickest one from the 3 wires) from the low and high beam, cut it and wire it to a 12v DC current wire from your scooter.
You will have to drill a hole in order to fix the led to this support in the position you want to.
This is a piece required if you want to upgrade your Piaggio Fly Scooter headlight from bulb to LED.
I bought the LED from ebay (COB LED 35w Motorcycle) and I needed a support that will fit into the original headlight of my scooter to hold the new LED.
You will need to rewire your headlight from AC to DC; in order to do that you have to take out the input AC wire (the thickest one from the 3 wires) from the low and high beam, cut it and wire it to a 12v DC current wire from your scooter.
You will have to drill a hole in order to fix the led to this support in the position you want to.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!