Pica-tinny Riser

Hi,
This is a simple pica-tinny riser for an airsoft gun, with a basic frame and a 10mm rise inbetween the bottom of the top rail and the top of the bottom rail.

The holes in the main body are currently at 3mm and I drilled them to 3.5mm after and used m4 bolts to tap them, and then drilled the clamp side to 4.5mm to make it a clearance hole. set a small recess to fit the bolt head which will probably need to be change depending on the screw you use.

I printed with the main part upside down and it came out quite well, but needed supports. I'd try printing it on it's side but i'm kind of new to this.

This version is kind of short, certainly wouldn't fit anything more than a small optic (desgined it for my KRYTAC LVOA instead of shelling out for a store bought one), also the current design will NOT stand up to much abuse at all.. if the style of this isn't what you're looking for feel free to message me and i'll make some changes to style, length or amount of rise!

change it