Pikachu 2-piece Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben The Frame used in the picture can be found here: Modular Magnetic Frame System for Hueforge ArtThe Frame is used in along with the Magnetic mount found here: Magnetic Wall Mount for Hueforge Pikachu 2-piece Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mmThe Model is 200x400mm in sizeYou may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 4.8mm and the Actual Thickness is 2.8mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.7 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.2This print uses 4 unique filaments ***attached .3mf file prints the first 4 layers at 0.25