Pikachu Bookmark or Portrait

Per requests I've updated the first four Pokemon, bookmarks(47x150mm, 42x150mm originally) and portraits(133x200mm, 169x200 originally) so they may look better as a collection. I also made the base a little thicker. The bookmark is on plate 1 and the portrait is on plate 2. PikachuPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with HueForge, just use a lighter to whisk them away. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Ba