Pikachu card (HueForge)

File should be ready to print _____________________________________________Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 143.4x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Cocoa Brown At layer #14 (1.2mm) swap to Red At layer #16 (1.36mm) swap to Sunflower Yellow At layer #23 (1.92mm) swap to White for the rest.