Pikachu Evolution Hueforge Bookmarks - 2 sizes

Pikachu Evolution Hueforge Bookmarks - 2 sizes Large 65mm x 200mm Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 65.03x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.1mm and the Actual Depth is 2.6mm Filaments Used:PLA BambuLab Basic Jade White Transmission Distance: 5.8PLA BambuLab Basic Black Transmission Distance: 0.2PLA PolyTerra Army Brown Transmission Distance: 0.1PLA PolyLite Wine Red Transmission Distance: 1.7PLA BambuLab Basic Gold Transmission Distance: 2.8PLA PolyLite Lemon Yellow Transmission Distance: 5.7This print uses 6 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions:Start with Jade WhiteAt layer #15 (1.28mm) swap to BlackAt layer #17 (1.44mm) swap to Army BrownAt layer #18 (1.52mm) swap to Wine Red