Pikachu Hueforge

Project: pikachu.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 142.95x251.677mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #9 (0.8mm) swap to Cobalt Blue At layer #12 (1.04mm) swap to Red At layer #17 (1.44mm) swap to Sunflower Yellow At layer #21 (1.76mm) swap to WhiteBorder Only Colors from here until the end. At layer #28 (2.32mm) swap to Red for