Pikachu HueForge

by 81 Prints

782 Downloads

337 Likes

497 Makes

Download Model

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150x150mm in sizeFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #11 (0.56mm) swap to Red At layer #23 (1.04mm) swap to Yellow At layer #35 (1.52mm) swap to Jade White for the rest.