PIKACHU HUEFORGE NO FRAME

FILE IS READY TO PRINT I SUGGEST TO SKIP USING JADE WHITE ( THIS WHITE IS NOT COVERING A LOT) Reminder:My models mostly cover the entire bed,this means the purge line is sometimesrunning through the bottom of the print.You have 3 options here:- Leave as is, you can just cut them of afterwards.- Remove immediately after the purge line is printed.- Scale the model:*** WARNING ***WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!The Z-height must always be as original, otherwise the printis messed up. If u want to support my work https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT For request send me dm Project: tattoo sketch_ pikachu-2.jpgPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 116x200mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used:PETG JAYO Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA Er