Pikachu mosaic hueforge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm The Model is 100x157.98mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.7mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA Sunlu Meta red Transmission Distance: 7PLA+ Sunlu Orange Transmission Distance: 5PLA+ Sunlu Pure Yellow Transmission Distance: 5PLA+ Sunlu White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions:Start with BlackAt layer #6 (0.8mm) swap to redAt layer #11 (1.4mm) swap to OrangeAt layer #12 (1.52mm) swap to Pure YellowAt layer #18 (2.24mm) swap to White for the rest.