Pill Container

There are 2 sizes depending on the pill’s size. Thyroid medication is a very small pill and is taken alone on an empty stomach. The container has a lid marked ‘Thyroid’ but there is also a lid with no label for a small pill such as for heart pain.
M4 nuts and bolts are used. For the small container an M4 6mm bolt and for the large container an M4 13-20 mm bolt is needed. I find that a nyloc nut does not work well but some type of locking is needed – I use Loctite Blue.
Printing with PLA works very well. For the lid print as present with a ‘tree support’ for the center bolt recess. The support is easily removed with an Allen driver pushing through the hole. The lettering is clear if your printer is calibrated. I use a 0.6 nozzle with no problem. Print with the inside curves first and limit crossing. Three layers and 20% infill.
After printing a very light sanding over the lettering will make it smoother so the lid rotates easily. Also, the slight ramp on the underside of the lid need