Thingiverse
Pill Shelf
von christianelder
142
Downloads
195
Likes
0
Makes
This shelf is designed to be easy to print and build.
If you're clever about it, all you need is a table saw and some sand paper to cut and shape the wood parts.
Here I used some 3/4 oak from home depot to make it super simple.
It's easy to change the length of the shelf just by modifying the length of the wood parts.
If you don't want a hole in the side, just mirror the part without it.
UPDATE: 05.29.2020
The recent middle shelf addition allows for the integration of a wireless Qi charger, compatible with iPhone 11.
For Mid_Shelf.stl, charger must be a cylindrical shape, measuring 68mm in diameter and about 11.7mm tall.
While I haven't tested the fit, the Mid Shelf 70mm diameter hole.stl file should fit a 70mm diameter charger.
Here's one that should work:
https://www.amazon.com/Wireless-Charger-Universal-Compatible-Qi-Enabled/dp/B07N13NQ3R/ref=sr_1_1?dchild=1&keywords=B07N13NQ3R&qid=1590783918&sr=8-1
Hope you enjoy!
If you're clever about it, all you need is a table saw and some sand paper to cut and shape the wood parts.
Here I used some 3/4 oak from home depot to make it super simple.
It's easy to change the length of the shelf just by modifying the length of the wood parts.
If you don't want a hole in the side, just mirror the part without it.
UPDATE: 05.29.2020
The recent middle shelf addition allows for the integration of a wireless Qi charger, compatible with iPhone 11.
For Mid_Shelf.stl, charger must be a cylindrical shape, measuring 68mm in diameter and about 11.7mm tall.
While I haven't tested the fit, the Mid Shelf 70mm diameter hole.stl file should fit a 70mm diameter charger.
Here's one that should work:
https://www.amazon.com/Wireless-Charger-Universal-Compatible-Qi-Enabled/dp/B07N13NQ3R/ref=sr_1_1?dchild=1&keywords=B07N13NQ3R&qid=1590783918&sr=8-1
Hope you enjoy!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
