Thingiverse
Pinball - Playfield Level
von George-Corrigan
6
Downloads
4
Likes
0
Makes
This is a level for pinball machine playfield. This is meant to be placed between the flippers to get a more accurate level. This supports be front to back and side to side leveling.
The mounts are for Bubble Levels measuring 18x15x52mm.
Here is a link for the levels I used on Amazon:
https://www.amazon.com/dp/B0C3HS4HQ9
Note: The item description mentions that they are 15x15mm, however I measured them as 18x15mm.
-- This is printed on its bottom with no supports.
The mounts are for Bubble Levels measuring 18x15x52mm.
Here is a link for the levels I used on Amazon:
https://www.amazon.com/dp/B0C3HS4HQ9
Note: The item description mentions that they are 15x15mm, however I measured them as 18x15mm.
-- This is printed on its bottom with no supports.
George-Corrigan veröffentlicht auch auf
53 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!