Thingiverse
Pincab Test Button Holder
by moeser
2
Downloads
1
Likes
0
Makes
This is a complete from-scratch redesign of the excellent "Pincab Test Switch Holder + Cable organizer" by jawah, available at https://www.thingiverse.com/thing:3983345 . I wanted a similar design but didn't want the cable organizer, and I wanted the coin door button on the front.
Similar to jawah's design, I use 7mm momentary pushbuttons, EXCEPT for the coin door button, which is a 7mm **latching** pushbutton (non-momentary). You could instead use a "miniature toggle switch" for the coin door switch, and just orient it to toggle left and right to match the lettering on the case. The cable entry in the back has a notched base to support a small zip tie. The zip tie should help hold the cables in place, but isn't required.
V2 is edited to enlarge the text and make the holes at the top fit a switch better.
Similar to jawah's design, I use 7mm momentary pushbuttons, EXCEPT for the coin door button, which is a 7mm **latching** pushbutton (non-momentary). You could instead use a "miniature toggle switch" for the coin door switch, and just orient it to toggle left and right to match the lettering on the case. The cable entry in the back has a notched base to support a small zip tie. The zip tie should help hold the cables in place, but isn't required.
V2 is edited to enlarge the text and make the holes at the top fit a switch better.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
