Thingiverse

PiPod enclosure V2

von BramRausch

40 Downloads

28 Likes

0 Makes

This is the enclosure for my PiPod project. The PiPod is a portable music player made with a Raspberry Pi Zero.

[If you want the buy the PiPod board you can visit my Tindie store](https://www.tindie.com/products/Bram/pipod-raspberry-pi-zero-portable-music-player/).
For more information about the build visit [Hackaday.io](https://hackaday.io/project/26157-pipod)

# Board thickness
The new PiPod boards will have a thickness of 1.6mm for this version you have to download the 1.6mm version of the top and bottom STL.

#PiPod features
##Display
The display on this board has a resolution of 320 by 240 pixels with a screen diagonal of 2.2”. It is connected to the Raspberry Pi using the SPI bus.

##I2S Audio output
This board includes the PCM5102A a 24-bit I2S DAC with a 3.5mm jack. This IC is used to generate high-quality audio without a hum like you would get if you're using the onboard PWM as the audio source.

##User controls
On the board are controls for navigation, volume

case electronics Hackaday media player media center mp3 player music musicplayer PiPod Raspberry Pi raspberry pi case Raspberry Pi Zero tindie case electronics Hackaday media player media center mp3 player music musicplayer PiPod Raspberry Pi raspberry pi case Raspberry Pi Zero tindie

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat