Pirate Radio Case

I recently bought the Pirate Radio kit from Pimoroni, and felt the need to add some back-protection to it.
First of all, sorry for the mixture in material thickness. Made this thing out of scrap I had lying around.

Tools needed:
- Lasercutter
- Sander or Dremel to make the bottom smooth

Material used:
- 3mm Plywood
- 4mm Plywood
- 6mm Plywood

The layer names in the SVG file will tell you what thickness is required and it's location for assembling. Plate1 is the one you should push in first and will fit snuggly in the screws, and then you work your way up to plate 8. At the end, push in the 2 grips (4mm) to keep things in place/aligned.
If all fits well you can start glueing the layers together. On my setup layers 1 & 2 are loose (the screw holds them thight) and the rest are glued together. It's not coming off on my end.
As a final step, use a sander/dremel tool to sand the bottom to your liking.

Thing you might want to improve:
- the 2 grips at the end, you could