Pirate Skull V2 (hueforge)

Pirate Skeloton V1 (hueforge). This is a 4 color print. Hope you enjoy it! If you use the above print profile, it's sliced so the bottom layers are thicker to save time (saves about an hour). if you are setting up on a different printer use the information below to set the layers after you slice. Thanks. See Printing instructions below. you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence. Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount Printing Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm The Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Silver Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA+ Sunlu White Transmission Distance: 5 This print uses 4