Pixel Pumpkin Fidget (2 sizes)

If you’re looking for another Halloween fidget - I got you covered with this Pixel Pumpkin 🎃I have included two sizes of pumpkins, small and large.Dimensions of Small Pixel Pumpkin: 2 in. x 2 in. x 1 ¾ in.Dimensions of large Pixel Pumpkin: 2 ⅓ in. x 2 ⅓ in. x 2 ¼ in.This is a detailed print with the small size taking 4 hrs (on my Bambu printer) and the large size taking 5 hr 15 min. Because of that I included both sizes. 3D Print Settings:Basic PLA works best*Layer Height 0.2mm (with Initial Layer Height set at .32)Infill 15%Detect thin walls (turned on)Supports highly recommended (see below)**Smooth print plate with a little glue smeared on also recommended*Basic PLA is the best for this print. I don’t usually make recommendations on types of PLA but I don’t recommend PLA Silk or PLA Matte filaments for this print. It is very detailed (on the inside) and the tolerances are small. I printed severa