Plague Mask

This is an attempt at a Plague Mask reminiscent of those used in the 17th century. The mask consists of 2 basic pieces that can be printed on a 5 x 8 print bed. They are aligned with (3) #4 x 1/2 screws and glued together. If you have a larger print bed you may want to scale the files to fit your face better. The beige mask in the photos is scaled to 120% and is a bit big. The left and right eye sockets are attached separately to be easily printed in a contrasting color. They are keyed for orientation and are intended to be glued in place also. The lens is the same part for each side and is glued into each eye socket from the inside of the mask. The buckle is designed for 1" nylon web. The web loop around the head will be three layers thick through the buckle. The top web will be 2 layers thick through the buckle. Sleeves are provided to tidy up the webbing as needed. For comfort the mask edges that touch the face will probably need to be padded with whatever you may have available.