Planer Board

With this planer board you can make both port and starboard side versions by mirroring the board and the flag STL files in your slicer. The release bracket is the same for both sides.

If printing the original file size, you need at least a 200x300 build plate. Reduce to 80% in all axis if using a 200x200 build plate. I believe that just making it shorter to fit the build plate and keeping the other 2 axis at 100% might be as good, if not better, because you'll have more surface area in the water to cut away from the boat.

I didn't put any mounting holes in for the release bracket to be fastened to the board because I've been experimenting with hole placement for custom tuning purposes. Please pre drill all holes if you plan to use screws so you don't split the plastic.

Also, adding the correct amount of lead weight in the bottom side groove for the board to sit correctly in the water needs to be tuned per board. Due to the different buoyancy properties of the plastic,