Planet Mercury - Hueforge

This is 4 color Hueforge of planet Mercury. Its part of my project to make all planets as a hueforge pictures, so i can hang them on my wall. I had to change the size to 100x100, because of MakerWorld upload limitations. The raw model is 180x180. You can change the size to your liking in the slicer. Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 1.8mm and the Actual Depth is 1.8mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA DevilDesign Gray Transmission Distance: 1.7PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with