Plant Guard

I often need plant supports for my trees. Unfortunately, it was not possible to tie the trees to the top of the supports due to the flexibility of the supports! That's why I figured out that they need a bracing to hold the tree properly even on top of the plant supports.With the 100 and 50 mm extension, it is possible to bridge larger distances. A distance of 25 cm must be bridged in the uploaded GCODE. Of course, the more jumpers there are, the more studs need to be printed.Important things when printing:- I also tried it with PLA, but it was very brittle, so I recommend PETG- a layer thickness of 0.2 is sufficient- minimum 3 layers of vertical wall thickness- fill at least 20-30% due to stability- for me, the organic supports from the table worked - it is recommended to print the studs with a larger fill