Plant root irrigation funnel system

Large volume root irrigation system, for large plants, shrubs and small trees etc. In use it's hidden in the ground!This design is made of four parts:A Spike that reaches down into the ground.An Extension tube, for when you want to go deeperA Funnel that you pour water intoA Cover plate, to stop dirt and small animals falling in.This is what you see when it's in place. Just pour your water onto the square. This is for when you want to get a lot of water down into the roots. Compared to watering on the surface, this prevents wastage lost to evaporation, and from water simply running off sideways and not reaching the plant at all. Depending on the depth needed, you may want to print one (or more) of the extension tubes. The bottom spike has a couple of holes going out sideways near the bottom. (They are on the sides, and not on the bottom, so they don’t get plugged up with soil when you push it down into the ground) Printing notesThis prints well without the need for supports. Yo