Plaster & Candle 3D Mold

This project is a 3D printed mold designed to create a silicone mold, which can then be used to cast plaster (gypsum) planters or containers.The final plaster pieces can be used as small vases, decorative containers, or candle holders.🔧 Assembly & Silicone Casting InstructionsInsert threaded brass bushingsThe small holes in the 3D printed parts are designed to accept threaded brass inserts.Install the inserts and assemble the mold using screws to securely hold all parts together.Seal the moldBefore pouring the silicone, apply a small amount of masking tape between the base and the side walls to prevent silicone leakage.Pour the siliconeOnce fully assembled and sealed, pour the liquid silicone into the mold.Allow it to cure completely according to the silicone manufacturer’s instructions.Remove the 3D printed partsAfter curing, carefully disassemble and remove all 3D printed components.You now have a flexible silicone mold ready for casting.🪨 Plaster Casting & Final UseCast plaster (g