PlayStation 4 controller mini wheel

Rack and pinion steering for your PS4 controller. 100 degrees of rotation. Great for finer control in racing games. UPDATE:*new wide wheel option [1cm larger]-much improved frame for stability in hard driving situations-new PS button lever. What you need: 22mm diameter bearing, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings 1.2mm diameter metal rod: push pin/paper clip/small nail/needle. What would MacGyver do... Superglue   Assembly: Glue the top and bottom edge of the bearing into the frame. Wait for glue to dry. Superglue might leave a white haze on the controller if it's not dry. Snap in the lever for the PS button. Snap the rack onto the frame. Put a 90 degree bend on the end of a paper clip [3mm tab]. Snip off 13mm from the bend. If you are using a small nail with a head just trim to length. Put the piece down through the rack and press fit into the pivot. If it's loose in the pivot, use superglue. You wa