Thingiverse
Music
Ver Modelo
PlectrumBox
14
Descargas
8
Likes
1
Makes
Material
----------
First, I printed the Box with PLA with an infill of 40%.
For the second print, I used wooden filament and an infill of 100%.
Tip: If you won't to infill at 100%, set the wall thickness to 2 x Extruderdiameter or you will see the points of intersection.
Be careful...
----------------
.. when you open the box for the first time ;)
----------
First, I printed the Box with PLA with an infill of 40%.
For the second print, I used wooden filament and an infill of 100%.
Tip: If you won't to infill at 100%, set the wall thickness to 2 x Extruderdiameter or you will see the points of intersection.
Be careful...
----------------
.. when you open the box for the first time ;)
GrimbiXcode también publica en
5 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
