Ploopy Knob Haptic Feedback Mod

Add satisfying haptic feedback to your Ploopy Knob! Buzz buzz! This modification uses a small vibration motor to create a tactile "detent" feel as you turn the knob. The feedback is controlled entirely through QMK firmware, allowing for full customization of the feel. This model is for a modified Ploopy Knob base designed to hold a 10mm Adafruit vibration motor. Note: This project requires soldering surface-mount (SMD) components. A moderate level of soldering experience is recommended. Build guideCheck it out on GitHubDescriptionTo get haptics working on your Ploopy Knob, you will need to modify your knob PCB. The existing PCB contains footprints for a quad resistor array as well as a mosfet that is used to drive the motor; however, these footprints are not populated. Links to purchase the components and tools to complete this project are below, but please check out my GitHub repository for a detailed build guide. It also contains links to the firmware you will need to flash t