Thingiverse
poang Mouse Rest
door BETLOG
40
Downloads
40
Likes
0
Makes
- A mouse-rest/pad that uses a single 4-ish mm woodscrew to attach to an ikea poang chair's arm.
- Not sure if 003 will be too big. Currently using 002 and although not perfect (it's 10-20mm too far forwards) I see no need to go bigger or different.
- I WAS using PET to compensate for the refraction of 3dprinted PLA occasionally making the mouse movement weird. However unless you live in a cold climate this will probably be slightly sticky on your hand, and inhibit movement.
- A cut-to-fit sheet of cheap buildtak (adhesive polypropylene) as sold for use on 3d printer heatbeds is actually the ideal surface. The slightly textured surface is perfect.
- Logitech sell an almost identical surface on their "Logitech G440 Hard Gaming Mouse Pad", but those are expensive, have additional layers, and are not self adhesive.
.
- Works for me:
PLA, 0.4mm nozzle, 1.2mm walls/top/bottom, 10% triangles infill.
- Not sure if 003 will be too big. Currently using 002 and although not perfect (it's 10-20mm too far forwards) I see no need to go bigger or different.
- I WAS using PET to compensate for the refraction of 3dprinted PLA occasionally making the mouse movement weird. However unless you live in a cold climate this will probably be slightly sticky on your hand, and inhibit movement.
- A cut-to-fit sheet of cheap buildtak (adhesive polypropylene) as sold for use on 3d printer heatbeds is actually the ideal surface. The slightly textured surface is perfect.
- Logitech sell an almost identical surface on their "Logitech G440 Hard Gaming Mouse Pad", but those are expensive, have additional layers, and are not self adhesive.
.
- Works for me:
PLA, 0.4mm nozzle, 1.2mm walls/top/bottom, 10% triangles infill.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
